Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Laguna
    4. : How to replace the gear knob in the Renault Laguna?

Renault Laguna - Video tutorial

Model: Renault Laguna X74, MK 2, Laguna 2 - Years 2001-2007
Part: Gear Shift Knob
Operation: How to replace the gear knob in the Renault Laguna?

In this tutorial we can see how to replace the gear knob in the Renault Laguna, a very simple and quick operation. First of all, let's go inside the car, then unhook the base of the gear lever boot by levering along the perimeter. Then we grab the knob, rotate it in both directions and, at the same time, pull it upwards to remove it from the lever. At this point, all that remains is to separate the knob from the boot by cutting the plastic strap, place the replacement and reassemble everything following the reverse procedure.


Posted on 17 May 2024 by ScegliAuto



How do you replace the gear knob on the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) In order to replace the Renault Laguna gear knob, you need to pry the lower part of the leather boot that wraps the gear lever, so that the fixing cl
How to replace the gear knob of the Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, Laguna 3, MK III, X91) Today we will discover the necessary instructions to disassemble and replace the gear knob of the Renault Laguna, in simple and quick steps. First of
How do you replace the gear knob on your Renault Laguna?
Renault Laguna (2007-2015 / MK 3, Laguna III, Laguna 3, MK III, X91) To be able to replace the gear knob on the Renault Laguna, simply grab the old knob and move it slightly first to one side and then to the other to b

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos