Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : How to replace the gear knob of the Saab 9-5.

Saab 9 5 - Video tutorial

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Gear Shift Knob
Operation: How to replace the gear knob of the Saab 9-5.

If the gear knob in your Saab 9-5 first generation (year 1997-2010) is too worn out and you want to replace it yourself, then all you have to do is pay attention to the following instructions and follow all the steps. First of all, get into the car and make sure it is turned off, then remove the leather part with your own hands. Once you have done that, take the knob and pull it upwards forcefully until it is completely disassembled. Finally, install the new knob and properly reposition the leather cover.


Posted on 22 July 2023 by ScegliAuto



Changing the gear oil
Saab 9 5 (1997-2010 / MK 1, Ys3e) In this tutorial, the gearbox oil is replaced on a Saab 9 5. Once the gear oil pan under the car has been identified, with a 24 mm wrench, we unscrew
How to replace the crankshaft position sensor in the Saab 9-5?
Saab 9 5 (2010-2012 / Ys3g, MK 2) In this tutorial, we can see how to replace the crankshaft position sensor in the Saab 9-5, a very simple and quick operation. First of all, make sur
How do you replace the starter motor on the Saab Nove Cinque?
Saab 9 5 (1997-2010 / MK 1, Ys3e) To be able to replace the starter motor of the Saab 9 5 you have to go to open the hood and access the components below, as the starter motor is loca

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos