Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Cordoba
    4. : How to adjust the time on the Seat Cordoba - Ibiza

Seat Cordoba - Video tutorial

Model: Seat Cordoba MK 2 - Years 2002-2009
Part: Checks and maintenance
Operation: How to adjust the time on the Seat Cordoba - Ibiza

Today's steps will show us how to change the time on the display of the instrument panel of the Seat Cordoba, as well as the Seat Ibiza. First, we get into the car and start up the instrument panel; then we hold down the right button on the panel and rotate the button, changing the hour and then the minutes, as shown in the video. At this point, we press the button again to exit the time modification setting, saving the changes made; it is possible to change the time at any time.


Posted on 16 May 2024 by ScegliAuto



How to replace the window regulator button on Seat Cordoba - Ibiza
Seat Cordoba (2002-2009 / MK 2) .. panel of the Seat Cordoba, but also of the Seat Ibiza. First we open the front door and start to pry the plastic cover of the grip handle, in order..
How to program the key of the Seat Ibiza Cordoba?
Seat Cordoba (2002-2009 / MK 2) .. programming the new remote control for the Seat Ibiza Cordoba. To perform the first procedure, we need to access the dashboard and leave the first key..
Where are the fuses located in the Seat Cordoba?
Seat Cordoba (2002-2009 / MK 2) All the fuses of the Seat Cordoba are contained within the only fuse box that is installed in the car: it is located on the left side of the dashboar

    Frequently Asked Questions

    • Cordoba 2002-2009 - Why did the remote control battery light come on in the Seat Cordoba? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos