Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Sherco
  4. :
  5. Sherco 250
  6. : How do you replace the gasket of the Sherco 250 cylinder head?

Model: Sherco Sherco 250
Part: Checks and maintenance
How do you replace the gasket of the Sherco 250 cylinder head?

In order to replace the head gasket of the Sherco 250, you need to loosen the screws that fix the engine cylinder to its housing, in the upper part of the engine block: to do this, you will also need to remove the ignition coil and the spark plug. Once the cylinder has been removed, you will be able to locate the underlying gasket, which must be removed from its housing by inserting the new one; once the new gasket is in place, you will need to reinstall the cylinder to ensure that everything is functioning correctly.


Posted on 14 March 2024 by ScegliAuto



How do you replace the flywheel of the Sherco 250?
Sherco 250 In order to replace the flywheel of the Sherco 250 it is necessary to loosen the screws that fix the casing positioned on the left side of the bike,
How do you change the coolant on the Sherco 250?
Sherco 250 In order to replace the Sherco 250 coolant, you need to unscrew the radiator cap, which is located on the front of the bike: once the radiator cap is

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos