Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sherco
    3. :
  3. Sef 300
    4. : How do you replace the battery of the Sherco SEF 300?

Model: Sherco Sef 300
Part: Battery
How do you replace the battery of the Sherco SEF 300?

In order to replace the battery of the Sherco SEF 300, you need to loosen the screws that secure the motorcycle seat to its housing, so that it can be removed to access the components below. Once the seat has been removed, you can locate the underlying battery: it can now be disconnected from the power cables and released from the fastening screws. Then it can be removed and the new one inserted: it must be properly installed to ensure that everything works correctly.


Posted on 22 March 2024 by ScegliAuto



How do I map the Sherco SEF 300 engine?
Sef 300 To be able to map the Sherco SEF 300 engine, you need to loosen the screws that secure the saddle and also those that secure the side panels of the b
How do you top up the coolant on the Sherco SEF 300?
Sef 300 In order to perform the coolant refill of the Sherco SEF 300, you need to locate the appropriate vent that allows you to insert the fluid into the co
How do you replace the instrument cluster of the Sherco SEF 300?
Sef 300 In order to replace the instrument panel of the Sherco SEF 300 it is necessary to loosen the screws that fix the panel to its housing, so that it can

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos