Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sherco
    3. :
  3. St 290
    4. : How do you replace the fork of the Sherco ST 290?

Model: Sherco St 290
Part:
How do you replace the fork of the Sherco ST 290?

In order to replace the fork of the Sherco ST 290, first you need to remove the front wheel from its housing: you will need to start by loosening the screws that fix the central nut of the front wheel, thus removing the axle. At this point, you can proceed by loosening the screws that fix the brake caliper to the corresponding disc, so that it can be completely detached. Now you can remove the wheel and proceed by loosening the nuts that fix the fork to the handlebar, completely detaching it; now it will be possible to insert the new replacement part, also mounting all the other parts previously removed.


Posted on 8 May 2024 by ScegliAuto



How to remove the forks on Sherco SE - ST 290 Trial (2004)
St 290 Let's see in this video how to remove the front forks on various Sherco models, in the Trial version, such as the SE and the ST 290. First of all, le
How do you replace the sprocket on the Sherco ST 290?
St 290 In order to replace the sprocket of the Sherco ST 290, you need to loosen the screws that secure the casing located on the left side of the motorcycl
How do you replace the clutch on the Sherco ST 290?
St 290 In order to replace the Sherco ST 290 clutch it is necessary to loosen the screws that secure the casing positioned on the right side of the bike, im

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos