Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Sherco Sm 50 - Videoguide

Sherco Sm 50
How do you replace the steering of the Sherco SM 50 R?
To replace the handlebars of the Sherco SM 50 R, first you need to grab the grips at the ends of the handlebars and pull them outwards to remove them from …read all…
Posted on 22 April 2023 by ScegliAuto
Sherco Sm 50
How do you replace the side fairing of the Sherco SM 50?
In order to replace the lateral fairing of the Sherco SM 50 it is necessary to loosen the screws that fix it to its housing in correspondence with the upper …read all…
Posted on 15 May 2023 by ScegliAuto
Sherco Sm 50
How do you replace the Sherco SM 50 muffler?
In order to replace the muffler of the Sherco SM 50 you have to unscrew the screw located in the central rear part of the saddle, so that the latter can be …read all…
Posted on 19 April 2023 by ScegliAuto
Sherco Sm 50
How do you replace the tank and fuel cock on a Sherco with a 50 engine?
To replace the tank and the fuel cock of a Sherco with engine 50 you must first lift the saddle and then unscrew the bolts that secure the fairing. You can now …read all…
Posted on 7 April 2024 by ScegliAuto
Sherco Sm 50
How do I replace the Sherco SM 50 air filter?
In order to replace the Sherco SM 50 air filter, you have to remove the side fairings of the bike, so that you can have access to the internal components …read all…
Posted on 30 March 2024 by ScegliAuto
Sherco Sm 50
How to remove the original license plate holder on the Sherco SM 50
In this video tutorial we will see the main instructions to disassemble and replace the original license plate holder on a Sherco SM 50 motorcycle. First of …read all…
Posted on 3 February 2024 by ScegliAuto
(1) Checks and maintenance (1) Air filter (1) Muffler (1) (1) (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos