Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to disassemble the turbocharger of the Smart Fortwo 0.8 CDI.

Smart - Video tutorial

Model: Smart Smart 450 - Years 1998-2007
Part: Turbine
Operation: How to disassemble the turbocharger of the Smart Fortwo 0.8 CDI.

Let's see in this guide how to disassemble and replace the turbocharger of the Smart Fortwo 0.8 CDI. First, we open the rear hatch and start unscrewing the fixing screws located on the sides and brackets, removing the rear bumper. Then we remove the horizontal frame bar, as shown in the video. At this point, we disconnect the exhaust manifold of the turbocharger by unscrewing the fixing screws. We unscrew the turbine screws and disconnect the Wastegate valve, removing the turbocharger. Then we reassemble everything, applying the reverse procedure!


Posted on 12 July 2023 by ScegliAuto



Replacing the diesel filter of the Smart Fortwo 800 CDI
Smart (1998-2007 / 450) Let's see in this guide the steps that will allow us to disassemble and replace the diesel filter of the Smart Fortwo 800 CDI. First of all we lift t
How to replace the transmission oil in the Smart Fortwo CDI.
Smart (1998-2007 / 450) Shortly, we will see the steps necessary to replace the transmission oil of the Smart Fortwo CDI. It is possible to perform the oil change operation
Guide to replacing the starter motor of the Smart Fortwo 0.8 CDI.
Smart (1998-2007 / 450) In this video tutorial, we will see the main steps useful for disassembling and replacing the starter motor of the Smart Fortwo 0.8 CDI. First, we op

    Frequently Asked Questions

    • Smart 2007-2015 - How much does the turbocharger of the Smart Fortwo cost? Read Answer
    • Smart 1998-2007 - How much does the Smart 450 turbine cost? Read Answer
    • Smart 2007-2015 - How much does the turbine of the Smart Fortwo 451 cost? Read Answer
    • Smart 2007-2015 - How much does it cost to replace the Smart turbine? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos