Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to replace the front suspension arm in the Smart ForTwo?

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Arm
Operation: How to replace the front suspension arm in the Smart ForTwo?

In this tutorial, we can see how to replace the front suspension arm in the Smart ForTwo, a very simple and quick operation. First of all, we lift the side in question with a jack, taking all necessary safety measures, then we remove the wheel, detach the anti-roll bar link and remove the support for the bar itself. We then unscrew the three fixing bolts of the arm, using both an 18mm and a 19mm socket wrench, separate it from the chassis and, simply following the reverse procedure, we install the replacement.


Posted on 21 October 2023 by ScegliAuto



How to change the front shock absorbers of the Smart Fortwo
Smart (2007-2015 / 451) Let's see in this guide how to remove and replace the front shock absorbers of the Smart Fortwo, following these simple steps. First of all we lift t
How to change the rear suspension spring of the Smart Fortwo
Smart (2007-2015 / 451) In today's video tutorial we will see how to remove and replace the rear suspension spring of the Smart Fortwo, following these simple steps. First o
Replacement of the wheel arm of a Smart Fortwo
Smart (2007-2015 / 451) To proceed with the removal of the arm we will have to lift the car, preferably on a drawbridge, to have space as the operations could be quite tirin

    Frequently Asked Questions

    • Smart 2007-2015 - How much does the arm of a Smart cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos