Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
451
- Years 2007-2015 In this video we see how to replace the drive belt on a Smart 451. First, we need to remove the left rear wheel, then lift the car and access the protective cover behind the shock absorber, using some penetrating oil; once removed, we see the belt. Loosen the alternator tensioner bolt, lever it (without removing it completely) and the belt loosens. When this belt frays, it can happen - as in this case - that it hits the oil sensor, cutting it. We will therefore also have to change that. Before putting on the new belt, make sure there are no pieces of the old one along the way. When we put on the new belt, always do a test drive to verify that it has been positioned correctly. Recharge the alternator and the game is done. The tools that our youtuber uses to remove and replace the belts can be found on Amazon with the code B09KRSNCXV, at a price of 8.99 euros for the kit, free delivery for Prime customers.
Posted on 13 May 2024 by ScegliAuto
How to replace the alternator belt in the Smart ForTwo 451 CDI
Smart (2007-2015 / 451) In this guide we will explain the steps to take to replace the alternator belt in the Smart ForTwo 451 CDI. Let's start by lifting the car, disassemb
How to remove the third stop of a Smart ForTwo 451
Smart (2007-2015 / 451) Before we can start, we will have to get out of the cockpit of our Smart ForTwo 451, and then head towards the rear of the car. So let's start by uns
Smart Fortwo 451 1.0 MHD clutch disassembly instructions
Smart (2007-2015 / 451) In today's video tutorial we will see the main steps to be able to remove and replace the clutch in a Smart Fortwo 451 1.0 MHD. To access the clutch Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |