Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. SsangYong
    3. :
  3. Korando
    4. : Where is the fuse box of the Ssangyong Korando 3 located?

SsangYong Korando - Video tutorial

Model: SsangYong Korando MK 3 - Years 2010-2019
Part: Fuse box
Operation: Where is the fuse box of the Ssangyong Korando 3 located?

Thanks to the following guide, you will finally be able to locate in a few seconds and in complete safety the fuse box inside your third series Ssangyong Korando (year 2010-2019). The first thing you need to do is to reach the driver's seat and leave the door open in order to have access to the end of the dashboard. At this point, make sure that the car is turned off and parked safely, then remove the plastic cover on the dashboard and locate all the various fuses of the car that you were looking for. Finally, reassemble the protective cover correctly.


Posted on 17 April 2024 by ScegliAuto



Location and identification of the main relays and fuses on the Ssangyong Korando.
SsangYong Korando (2010-2019 / MK 3) In this video, we see the placement of the fuse boxes in the Ssangyong Korando: the first box is located in the passenger compartment, within the thi
How do you remove the door panel of the Ssangyong Korando?
SsangYong Korando (2010-2019 / MK 3) In order to replace the door panel of the Ssangyong Korando, you need to loosen the screws that secure the panel to its housing: the panel fixing scr
To reset the tire pressure on the Ssangyong Korando.
SsangYong Korando (2010-2019 / MK 3) Let's see how to reset the tire indicator light on the Ssangyong Korando: keep an eye on the speedometer display. Here we have two icons indicating a

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos