Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Subaru
  4. :
  5. Xv
  6. : How to replace the front fog light bulb of the Subaru XV

Subaru Xv - Video tutorial

Model: Subaru Xv MK 1 - Years 2012-2017
Part: Fog lights
Operation: How to replace the front fog light bulb of the Subaru XV

Below we will see the main instructions useful for disassembling and replacing the front fog light bulb of the Subaru XV, Crosstrek version. First of all, let's move to the front of the car and start by disconnecting the electrical connector of the bulb found at the back of the headlight; to access it, it may be necessary to remove the cover found underneath, as shown in the video. We then install the new front fog light bulb, with the same attachment; check its operation and reassemble the lower engine cover.


Posted on 10 May 2024 by ScegliAuto



How to replace the headlight bulb on Subaru Crosstrek XV?
Subaru Xv (2012-2017 / MK 1) In order to replace the bulb on the Subaru Crosstrek XV, you need to open the hood to gain access to the engine compartment. At this point it will be
How do you reset the Service light on the Subaru XV?
Subaru Xv (2012-2017 / MK 1) To reset the Service light on the Subaru XV, you need to turn on the instrument panel by rotating the specific key inside the ignition switch. Once t
How to replace the front wiper blade on a Subaru XV
Subaru Xv (2012-2017 / MK 1) Before we can start, we will have to get out of the cockpit of our Subaru XV, and then head towards the front windshield wiper. Let's start by liftin

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos