Do it yourself
| ||||
|
Suzuki Swift - Video tutorial
Model: Suzuki Swift
Rs41, AZG, MK 5
- Years 2010-2017 In this video, we can see how to replace the gearbox oil on the Suzuki Swift Sport (ZC32S). First, we need to remove the battery from the engine compartment and lift the vehicle slightly off the ground. Disconnect the gearbox linkages, which have a bayonet fitting. They are removed from the top. Then, remove one of the water pipes and the large 19mm bolt that the YouTuber shows us, which closes the oil filling hole. Now we need to remove the one underneath, which is the larger bolt (14mm head) on the side of the gearbox (I wonder if it's marked in blue on all cars?). By unscrewing it, the old oil will drain out, but remember to let it flow into a basin to dispose of it at a designated center. It is recommended to use a sealant to close the bolt, which is recommended to us and can be found on Amazon with the code B08BHT6T2Z for the price of 13.95 euros, with free delivery for Prime customers. To refill the gearbox with oil, you will need a funnel and a piece of plastic tubing, and approximately two liters of original Suzuki oil can be poured in.
Posted on 24 January 2024 by ScegliAuto
How to replace the gear knob on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Before starting, we will have to sit in the driver's seat of our Suzuki Swift. So let's start by going to disengage and lower the gearshift gaiter, c
How to change the engine oil of a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Before we can start, we will have to go and lift the front of our Suzuki Swift, thus reaching the oil spill nut. So let's start by unscrewing and rem
How to remove the Suzuki Swift gear knob
Suzuki Swift (2004-2010 / MK 4, Rs41) In today's video tutorial we will see the steps that will allow us to disassemble and replace the Suzuki Swift gear knob, following the instructions Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |