Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Vitara
    4. : How to replace the front windshield wiper blades of the Suzuki Vitara

Suzuki Vitara - Video tutorial

Model: Suzuki Vitara JT - Years 2005-2015
Part: Windscreen wipers
Operation: How to replace the front windshield wiper blades of the Suzuki Vitara

In this video we see how to easily change the front windshield wiper blades of the Suzuki Vitara MK3 version: these are the most common type of wipers, those with the hook that slides in the track. Of course, you need to be careful that it is not rusted, because in that case it will be much more difficult to remove it. (maybe a spray of WD-40 will be necessary). However, generally the hook, as seen in the video, comes off quite easily. Now we have the new wiper blade: all we have to do is insert the hook into the track, put the blade in a horizontal position and the operation is complete. Just make sure they are securely fastened.


Posted on 26 April 2024 by ScegliAuto



How to replace the wiper blades in the Suzuki Vitara?
Suzuki Vitara (2015-2023 / LY) This short and simple video tutorial teaches us how to replace the wiper blades which, due to dust, residues and temperature variations, can wear out
How do you replace the diesel filter on the Suzuki Vitara Brezza?
Suzuki Vitara (2015-2023 / LY) In order to replace the diesel filter on the Suzuki Vitara Brezza, you need to open the hood so that you can access the components inside the engine
Replacement of the front axle joint of the Suzuki Vitara
Suzuki Vitara (1999-2005 / FT, GT, MK 2) Let's briefly see the instructions that will allow us to disassemble and replace the joint and boot of the front driveshaft of the Suzuki Vitara. Fir

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos