Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Swift
    4. : Replacement of the cabin light bulb in the Suzuki Swift.

Suzuki Swift - Video tutorial

Model: Suzuki Swift A2L, MK 6 - Years 2017-2024
Part: Interior lights ceiling light bulb
Operation: Replacement of the cabin light bulb in the Suzuki Swift.

Shortly, we will see the steps that will allow us to disassemble and replace the interior light fixture of the Suzuki Swift. First, we get inside the car and start to disassemble and remove the light fixture; to do this, we pry on the sides, then remove the plastic cover of the bulb, as shown in the video. At this point, we remove the small torpedo bulb from the socket, then install the new one; we check the operation of the bulb and finally reassemble the fixture on the ceiling, applying the reverse disassembly process!


Posted on 4 May 2024 by ScegliAuto



Replacement of the rear fog light bulb of the Suzuki Swift.
Suzuki Swift (2004-2010 / MK 4, Rs41) The steps illustrated in this guide will show us how to disassemble and replace the rear fog light bulb of the Suzuki Swift. First, let's move to the
Suzuki Swift brake bulb replacement
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) Let's see below the instructions on how to remove and replace the rear light or brake light bulb of the Suzuki Swift, in simple and quick steps. Firs
How to replace the interior light bulb on a Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) We will see below the steps which will allow us to disassemble and replace the bulb of the passenger compartment light of the Suzuki Swift. First of

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos