Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Gts 125

Sym Gts 125 - Videoguide

Sym Gts 125
How to replace the rear brake pads of the Sym GTS 125
Today's instructions will show us how to disassemble and replace the rear brake pads of the Sym GTS 125 scooter, but also of the GTS 300. First of all, we put …read all…
Posted on 31 May 2024 by ScegliAuto
Sym Gts 125
To reset the Trip indicator on the Vespa GTS 125.
In this new mini guide dedicated to all owners of a Vespa GTS 125, we will discover how to manually reset the "Trip" indicator on the central dashboard. This …read all…
Posted on 29 August 2023 by ScegliAuto
Sym Gts 125
How do you disassemble the engine of the Sym GTS 125?
In order to disassemble the engine of the Sym GTS 125 it is necessary to completely remove the engine from inside its housing: to do this it will be necessary …read all…
Posted on 9 May 2023 by ScegliAuto
Sym Gts 125
How to change the time of the Vespa GTS
In this new mini guide, we will explain how to manually set the time displayed on the dashboard of your Vespa GTS 125. First of all you obviously have to …read all…
Posted on 30 August 2022 by ScegliAuto
Sym Gts 125
How do you replace the belt on the Sym GTS 125?
In order to replace the Sym GTS 125 belt it is necessary to loosen the screws that secure the transmission housing, located at the rear wheel on the left side …read all…
Posted on 30 April 2024 by ScegliAuto
Sym Gts 125
How to disassemble the Sym GTS 125 variator
In today's video tutorial we will see how to remove and replace the variator, but also the transmission belt, of the Sym GTS 125 scooter. First we place our …read all…
Posted on 15 April 2024 by ScegliAuto
(1) Engine (1) Brake pads (1) Instrument cluster (2) (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos