Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Jet14 125

Sym Jet14 125 - Videoguide

Sym Jet14 125
How do you reset the Oil Check light on the Sym Jet14?
In order to reset the Oil Check light on the Sym Jet14, you need to turn on the instrument panel by turning the key in its ignition switch: once the panel is …read all…
Posted on 21 February 2024 by ScegliAuto
Sym Jet14 125
How to replace the engine oil of the Sym Jet14 125
Let's replace the engine oil of the Sym Jet14 125 scooter together, performing the regular maintenance service. First, we put our scooter on the center stand …read all…
Posted on 23 October 2023 by ScegliAuto
Sym Jet14 125
How to replace the belt and variator on the Sym Jet14 124
Let's find out in this guide how to disassemble and replace the drive belt and the variator on the Sym Jet14 125 scooter, following the instructions below. …read all…
Posted on 8 May 2024 by ScegliAuto
Sym Jet14 125
How to change Sym Jet14 125 engine oil
Let's see in this short and simple guide we will see how to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Sym …read all…
Posted on 6 May 2024 by ScegliAuto
Sym Jet14 125
How to change the engine oil on the Sym Jet14 125cc
Today we will see the steps on how to carry out the maintenance service of the oil change on the Sym Jet14 125 scooter. First we place our scooter on the …read all…
Posted on 24 February 2024 by ScegliAuto
(1) Checks and maintenance (1) Engine oil (3)

See also:

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos