Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Joymax 300 I

Sym Joymax 300 I - Videoguide

Sym Joymax 300 I
How do you replace the transmission of the Sym Joymax 300i?
In order to replace the transmission of the Sym Joymax 300i, you need to loosen the screws that secure the appropriate casing, located on the left side of the …read all…
Posted on 19 May 2024 by ScegliAuto
Sym Joymax 300 I
Sym Joymax 300i front brake pads replacement
Today we will see how to disassemble the front brake pads on a Sym Joymax 300i scooter. First, let's unscrew the brake caliper screws, using a 12 mm socket …read all…
Posted on 4 March 2024 by ScegliAuto
Sym Joymax 300 I
Change the brake pads in the Sum Joymax300i
First of all, let's place our bike (in this case, the Sym Joymax 300 I) in a stable and safe position, that is, in a position that immobilizes it while the …read all…
Posted on 26 January 2024 by ScegliAuto
Sym Joymax 300 I
Sym Joymax 300 battery replacement
Today we will see how to remove and replace the battery of a Sym Joymax 300 scooter. First we are going to remove the side plastic covers, unscrewing the …read all…
Posted on 13 January 2024 by ScegliAuto
Sym Joymax 300 I
Sym Joymax 300 I engine oil change
In the video tutorial in question we will see how to replace the engine oil of a Sym Joymax 300 I. First we go to unscrew the oil vent bolt with a 17 mm socket …read all…
Posted on 25 December 2023 by ScegliAuto
Battery (1) Engine oil (1) Brake pads (2) Transmission (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos