Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : T 2 : Replacing the air filter on Sym T2

Model: Sym T 2
Part: Air filter
Replacing the air filter on Sym T2

Using the appropriate key, unclip and remove the rear seat of the motorcycle. From here, among other things, you can access the battery, but what interests us are the two bolts in front of it, which secure the main saddle. Once unscrewed, therefore, remove the aforementioned saddle and you will have access to the air filter box. Unscrew the four screws that secure it to the bike and remove the filter from the support. Fit the new air filter to the support and proceed backwards by screwing the box back to the bike and then fitting the two parts of the saddle. As you can see, this is a very simple operation.


Posted on 23 March 2024 by ScegliAuto



Replacing the air filter of a Sym VTS 200 scooter
Vts 200 Guide for replacing the air filter of a Sym VTS 200 scooter. Get the ONE Camamoto 77126035 air filter. Place the scooter on the central stand. The fi
How to replace the air filter on Sym Symphony S 150
Symphony 151 Let's see in this video how to disassemble and replace the engine air filter on a Sym Symphony S 150 scooter, in simple and quick steps. First we put
How to remove the air filter on Sym Vf3i
Vf31 How to remove the air filter of the Sym Vf3i scooter? Let's see how the air filter is removed from inside the container. We lock the scooter on the c

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos