Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. :
  3. Vf3i
    4. : How to replace the engine oil in the SYM VF3i scooter?

Model: Sym Vf3i
Part: Engine oil
How to replace the engine oil in the SYM VF3i scooter?

In this tutorial we can see how to replace the motor oil in the SYM VF3i scooter, a very simple and fast operation. First of all, make sure that the engine is sufficiently cold, then place a container underneath the scooter, locate the drain hole cap and unscrew it using a socket wrench. Let all the oil in the system drain out, remove the filter and clean it from any dirt residue. At this point, all that's left is to reassemble everything and pour in the required amount of oil through the top hole.


Posted on 17 May 2024 by ScegliAuto



Change the Sym Vf3i sccoter oil
Vf3i Do we want to change the scooter oil? Let's see how to remove the oil filter and how to change the oil itself on a Sym Vf3i scooter. We lock the scoo
How to reset the oil service on the SYM VF3i 185 scooter?
Vf3i In this tutorial, we can see how to reset the oil service on the SYM VF3i 185 scooter, an extremely simple and quick operation, to be performed only
How to replace the front brake pads on the SYM VF3i scooter?
Vf3i Replacing the front brake pads of the SYM VF3i scooter, as we can see in this tutorial, is an extremely simple and fast operation. First of all, posi

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos