Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Tata
  4. : Safari

Tata Safari - Videoguide

Tata Safari (1998-2019 / MK 1)
How do you reset the AdBlue light on the Tata Safari?

To reset the AdBlue light on the Tata Safari, you need to add additional fluid to the tank located at the bottom of the car. You can locate the vent where the …read all…
Posted on 27 June 2023 by ScegliAuto
Tata Safari (1998-2019 / MK 1)
How to replace the cabin air filter on the Tata Safari.

If we need to replace the cabin air filter on this vehicle, the description below provides useful instructions and the correct execution methods. The air …read all…
Posted on 9 June 2023 by ScegliAuto
Tata Safari (1998-2019 / MK 1)
How to change the engine oil of Tata Safari.

In this new guide dedicated to your Tata Safari, we will discover how to correctly change the engine oil and its filter. First of all, you must completely turn …read all…
Posted on 2 June 2023 by ScegliAuto
Tata Safari (1998-2019 / MK 1)
How to change the oil on the Tata Safari

If you want to change the engine oil and its filter on your Tata Safari but you don't know how to do it, don't worry because in our new mini guide you will …read all…
Posted on 22 December 2022 by ScegliAuto
Tata Safari (1998-2019 / MK 1)
How do i replace the battery of the Tata Safari?

In order to replace the battery of the Tata Safari you have to go to open the hood, so that you have access to the components inside the engine compartment. …read all…
Posted on 4 May 2024 by ScegliAuto
Tata Safari (1998-2019 / MK 1)
How to disassemble the tablets of the Nanny Safari

Our vehicle no longer brakes well? Let's see the disassembly and replacement of the tablets of the Tata Safari. We loosen the pins with a telescopic wrench and …read all…
Posted on 17 January 2024 by ScegliAuto
Battery (1) Checks and maintenance (1) Cabin air filter (1) Engine oil (2) Brake pads (1)

See also:

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos