Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Tesla
  4. :
  5. Model 3
  6. : How to reset the touch screen of a Tesla Model 3

Tesla Model 3 - Video tutorial

Model: Tesla Model 3 MK 1 - Years 2017-2024
Part: -board computer
Operation: How to reset the touch screen of a Tesla Model 3

In case of malfunction or freezing of the touch screen display of our car, we can try to perform a forced restart of the system. Today, through this very useful video guide, we will see how to perform this operation on a Tesla Model 3, a model in production from 2017 onwards. Let's start the procedure by turning on the vehicle's ignition and then putting it in parking mode. Then, we press and hold down the two steering wheel buttons simultaneously for about twenty seconds, until the screen turns off. Finally, we wait for the display to automatically restart.


Posted on 18 February 2024 by ScegliAuto



How to remove the left door panel in the Tesla Model 3?
Tesla Model 3 (2017-2024 / MK 1) As we can see in this tutorial, removing the left door panel in Tesla Model 3 is a very quick and easy operation. First of all, using a plastic spatu
How to replace the battery of the Tesla Model 3 remote control?
Tesla Model 3 (2017-2024 / MK 1) In this tutorial we can see how to replace the battery in the Tesla Model 3, an extremely simple and cost-effective operation. To do this, we will ne
Tesla Model 3 [electric]
Tesla Model 3 (2017-2024 / MK 1) In this video we will present the Tesla Model 3, one of the midsize sedans that has become one of the best-selling electric cars in the world. The co

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos