Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : After market xenon headlight installation

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Xenon headlight kit
Operation: After market xenon headlight installation

Open the front hood and remove the original bulb from the headlight bulb holder by disconnecting the relative power socket; then house the new xenon lamp by connecting the original power socket to that of the wiring of the new bulb; then connect the other sockets to the ignition control unit which it is suggested to fix on the inner edge of the mudguard. Repeat the same operation for the other headlight and connect the power supply wiring of the ignition control units to the battery, taking care to avoid interference with hot or moving elements.


Posted on 17 July 2023 by ScegliAuto



How to replace the Toyota Corolla headlight?
Toyota Corolla (1995-2002 / MK 1) In order to replace the Toyota Corolla headlight bulb, you need to open the hood to access the engine and grab the connector connected to the bulb at
Removal of Toyota Corolla headlight bulbs
Toyota Corolla (2000-2007 / MK 2) Are the headlight bulbs damaged? How to replace it from inside the Corolla headlight. We find the inspection cap of the headlight to remove it (locat
How do you replace the Toyota Corolla headlight bulb?
Toyota Corolla (2000-2007 / MK 2) In order to replace the Toyota Corolla headlight bulb, you need to open the bonnet to remove the screws and rivets from the corresponding headlight.

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos