Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to replace the anti-roll bar of the Toyota Rav 4

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 MK 2, Xa20 - Years 2000-2006
Part: Anti roll bar
Operation: How to replace the anti-roll bar of the Toyota Rav 4

In today's video tutorial we will see the instructions that will allow us to disassemble and replace the anti-roll bar of the Toyota Rav 4, but also on all the other suv models of the manufacturer. First of all we lift the car and start by unscrewing the nut of our anti-roll bar, using a socket wrench; then remove it and replace it with the new one, using only original or quality spare parts, as shown in the video. Once the new anti-roll bar has been installed, we can proceed, in the same way, with the replacement of the other rear anti-roll bar!


Posted on 15 April 2024 by ScegliAuto



Replacing the anti roll bar links on a Toyota RAV 4 II
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To replace the stabilizer bar links in a Toyota RAV 4 II: Get into the vehicle, turn off the car and apply the handbrake. Loosen the wheel bolts, lif
Fit the universal roof bars to a Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's see how to mount universal roof bars on a Toyota Rav 4. Universal roof bars are used on cars with rails (fixed bar clamped in the car roof) and
How to replace the headlight bulb on a Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Before we can start, we will have to go to open the front hood of our Toyota Rav 4. So let's start by unscrewing and removing the rear cover of the b

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos