Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How do you replace the third brake light bulb on the Toyota Yaris?

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Third brake light
Operation: How do you replace the third brake light bulb on the Toyota Yaris?

In order to replace the third brake light bulb of the Toyota Yaris, you need to open the rear hatch of the car so that you can access its internal part: here you will be able to locate the hole inside which the connector of the third brake light bulb is located. By disconnecting the connector, you will be able to remove the old bulb and replace it with a new one; the new bulb must now be inserted into the optical group, and then close the rear hatch to verify that everything is working properly.


Posted on 5 March 2024 by ScegliAuto



Toyota Yaris rear light bulb replacement
Toyota Yaris (1999-2005 / Xp10) Today we will see how to remove and replace the rear light bulb of a Toyota Yaris first series. First of all, we open the boot lid and remove the pla
Toyota Yaris brake lights replacement
Toyota Yaris (2005-2011 / Xp90) In today's video tutorial we will see how to remove and replace the rear brake light bulbs of a Toyota Yaris. First we open the tailgate of the trunk
How to remove the rear light bulb of a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before we can start, we will have to go and open the tailgate of our Toyota Yaris. So let's start by unhooking the clips that secure the internal cov

    Frequently Asked Questions

    • Yaris 2011-2019 - Why does the third stop of the Toyota Yaris not work? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos