Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to change the turn signal indicator light of the Toyota Yaris XP10 version

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Side indicator light
Operation: How to change the turn signal indicator light of the Toyota Yaris XP10 version

In this video we see how to change the turn signal light of the Toyota Yaris XP10 version: a plastic spatula will be sufficient to easily remove the turn signal from its housing. Once removed, we will have to disconnect the electrical part, removing the connector; we must be careful that it does not re-enter the bodywork or it will be difficult to recover it, so we must hold it in place with a bit of bodywork tape, but first we must clean it well with a spray of compressed air. Now just insert the new turn signal into its connector and press it back into the bodywork. Job done.


Posted on 25 March 2024 by ScegliAuto



How to replace the additional turn signal on a Toyota Yaris XP10
Toyota Yaris (1999-2005 / Xp10) Let's see how to replace the side turn signal gem on a Toyota Yaris XP10: first we need to remove the turn signal repeater; being under pressure, it
How to replace the turn signal indicator located on the Toyota Yaris rearview mirror
Toyota Yaris (2020-2024 / MK 4) With the help of the following video tutorial, we will explain how to replace the turn signal bulb located on the external rearview mirror of the Toy
How to top up the coolant on a Toyota Yaris XP10
Toyota Yaris (1999-2005 / Xp10) In this video, we see how to refill the coolant tank of a Toyota Yaris XP10. The cap of the tank of this car is easily found by opening the front hoo

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos