Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Alphard Vellfire
    4. : Where is the oil filter located in the Toyota Alphard?

Toyota Alphard Vellfire - Video tutorial

Model: Toyota Alphard Vellfire MK 3 - Years 2015-2023
Part: Oil filter
Operation: Where is the oil filter located in the Toyota Alphard?

In this video we can see where the oil filter is located in the Toyota Alphard and how to proceed in case we need to replace it, an operation to be carried out together with an oil change. As shown, the filter is located in the lower right area of the engine and is accessible by going underneath the vehicle. First of all, we locate the drainage hole bolt, then unscrew it and let the oil contained in the system come out. We then unscrew the filter housing using the appropriate wrench, insert the replacement along with a new gasket, reassemble everything and add the necessary amount of oil through the appropriate hole.


Posted on 8 May 2024 by ScegliAuto



Where is the oil filter located in the Toyota Alphard?
Toyota Alphard Vellfire (2015-2023 / MK 3) In this video, we can see where the oil filter is located in the Toyota Alphard and how to proceed if we need to replace it, which is a very simple o
How to replace the oil and the oil filter of Toyota Alphard
Toyota Alphard Vellfire (2008-2015 / MK 2) To replace the oil and the oil filter on the Toyota Alphard, we start by raising the car, we go under the car, with a wrench we unscrew the oil drain
How to replace the cabin filter in Toyota Alphard?
Toyota Alphard Vellfire (2008-2015 / MK 2) Replacing the cabin filter of the Toyota Alphard is an extremely simple and fast operation, let's see how to proceed in this tutorial. First of all,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos