Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How do you remove the rear seats of the Toyota RAV 4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa30, MK 3 - Years 2006-2013
Part: Seat
Operation: How do you remove the rear seats of the Toyota RAV 4?

In order to remove the rear seats, it will be necessary to push them completely forward and fold down the backrests: this way it will be possible to locate the screws that fix them at the end of the sliding rails. Once these screws have been loosened, it will be possible to push the seats backwards and loosen the ones that fix them at the front of the rails: now it will be possible to remove the seats from their housing, disconnecting the underlying connectors. In this way, the new replacement parts can be inserted, fixing them with screws and verifying that everything works correctly.


Posted on 9 May 2024 by ScegliAuto



How do you remove the rear seats from Toyota Rav 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To be able to remove the rear seats from the Toyota Rav 4 it is necessary to fold down the backrests of the aforementioned seats, so that they can be
How to remove the rear seats on a Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's see how to remove the rear seats on a Toyota Rav 4. Remove the seat from inside the passenger compartment (unscrew the pins placed above the pl
Removal of seats on Toyota Rav 4
Toyota Rav 4 (2019-2024 / MK 5, Xa50) Hello everyone! Today we will show you how to remove the seats on Toyota Rav 4. As shown in the video, you must first release them by pulling them up

    Frequently Asked Questions

    • Rav 4 2013-2018 - How to remove the rear seats of the Toyota Rav4? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos