Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Avensis
    4. : How do you replace the front headlight bulb of the Toyota Avensis?

Toyota Avensis - Video tutorial

Model: Toyota Avensis T250, MK 2 - Years 2003-2008
Part: Headlight bulb
Operation: How do you replace the front headlight bulb of the Toyota Avensis?

In order to replace the headlight bulb of the Toyota Avensis, you need to loosen the screws that secure the front bumper to its housing. To remove the bumper, you will need to loosen the screws located in the front wheel arches and in the lower and upper part of the bumper itself. Now you can loosen the screws that secure the headlight, removing it from its housing. By disconnecting the connectors at the back, you can remove the old bulb, replace it with a new one, and reassemble all the previously removed components.


Posted on 11 May 2024 by ScegliAuto



How to replace the front headlight bulb of the Toyota Avensis.
Toyota Avensis (2009-2018 / T270, MK 3) Today we will see, in this short and simple guide, the necessary steps to disassemble and replace the headlight bulb of the Toyota Avensis. First of
How do you replace the headlight bulb of the Toyota Avensis?
Toyota Avensis (2009-2018 / T270, MK 3) The operation of replacing the headlight bulb on the Toyota Avensis involves opening the hood, so that access to the components inside the engine com
How do you replace the rear headlight bulb of the Toyota Avensis?
Toyota Avensis (2009-2018 / T270, MK 3) In order to replace the rear headlight bulb of the Toyota Avensis, you need to open the rear hatch so that you can access the components inside the t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos