Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How to remove the stuck injector on a Toyota Corolla Verso D4D

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Injectors
Operation: How to remove the stuck injector on a Toyota Corolla Verso D4D

In this video we see how to remove a completely blocked injector inside the engine of a Toyota Corolla Verso D4D, without any special equipment from a specialized workshop. In fact, all you need is a crowbar and an extension like the one we see in the video. In addition to an industrial amount of WD-40 and a loosening liquid, which we will have to leave to act overnight, to try to unlock the injector. In any case, as we can see, it will still take quite a bit of force to remove it, because it was really very dirty. If it is not damaged, a good cleaning should be enough to then put it back in its place.


Posted on 13 May 2024 by ScegliAuto



Replace the headlight bulb on Toyota Corolla Verso 2002
Toyota Corolla (2000-2007 / MK 2) Let's see in this video how to remove and replace the headlight bulb on a 2002 Toyota Corolla Verso, in simple and quick steps. First of all, let's r
Toyota Corolla Verso fuse box location and diagram
Toyota Corolla (2006-2013 / MK 3) In this video tutorial we will look at the location of the fuse box and the diagram on a Toyota Corolla Verso. We find the different fuse boxes on ou
How do you replace the rear headlight bulb of the Toyota Corolla Verso?
Toyota Corolla (2000-2007 / MK 2) To replace the rear headlight bulb of the Toyota Corolla Verso, you need to open the rear hatch of the car so you can access the components inside th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos