Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. C Hr
    4. : How to reset the tire pressure light in the Toyota C-HR?

Toyota C Hr - Video tutorial

Model: Toyota C Hr Ax50, Ax10, MK 1 - Years 2016-2023
Part: Tires
Operation: How to reset the tire pressure light in the Toyota C-HR?

In this tutorial, we can see how to reset the tire pressure light in the Toyota C-HR, a very simple and quick operation. Before proceeding, we must have restored the correct pressure of each tire following the instructions in the manual. Let's start by inserting the key and turning on the instrument panel, then, using the directional buttons on the right side of the steering wheel, we reach the settings screen. We then enter "Vehicle settings", "Setup", move the selector to the "SET" option and confirm the reset. To complete the operation, simply restart the vehicle.


Posted on 17 May 2024 by ScegliAuto



How do you reset the tire pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, Ax10, MK 1) In order to reset the tire pressure warning light of the Toyota C-HR, you need to adjust all the tires to the recommended inflation pressure: this va
Guide to reset Toyota CH-R tire pressure warning light
Toyota C Hr (2016-2023 / Ax50, Ax10, MK 1) We see in this guide the main instructions for resetting the Toyota CH-R tire pressure warning light; before carrying out this operation, it is neces
How do you reset the tire pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, Ax10, MK 1) The tire pressure warning light reset operation on the Toyota C-HR is done by turning on the instrument panel, so that you can navigate within the me

Other guides that may interest you

    Frequently Asked Questions

    • Toyota C Hr 2016-2023 - What to do if the tire warning light comes on in Toyota CH-R? Read Answer
    • Toyota C Hr 2016-2023 - Tire pressure warning light on Toyota C-HR? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos