Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How to remove the outer door handle of the Toyota Corolla

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Handle
Operation: How to remove the outer door handle of the Toyota Corolla

Today's guide will show us how to disassemble and replace the external door handle of the Toyota Corolla, in simple steps. First, we open the front door and start by removing the rubber cap found on the side of the door; then we unscrew the screw inside, as shown in the video. Next, we remove the first rectangular piece of plastic, then disassemble the entire handle; all that's left is to replace it with the new one and reassemble everything, installing the handle and possibly the lock cylinder, then fixing everything with the side screw.


Posted on 17 May 2024 by ScegliAuto



Toyota Corolla exterior handle replacement
Toyota Corolla (2006-2013 / MK 3) Let's see the replacement of the exterior handle of a Toyota Corolla. We open the door and begin removing the door panel. We remove the internal hand
How to replace the exterior door handle of the Toyota Corolla?
Toyota Corolla (1995-2002 / MK 1) In order to replace the Toyota Corolla external door handle, the internal door panel must be removed: to do this, loosen the screw in the internal ha
How to replace the Toyota Corolla seat handle?
Toyota Corolla (2000-2007 / MK 2) In order to replace the inside handle of the Toyota Corolla you have to completely disassemble the door panel, so that you have access to the compone

    Frequently Asked Questions

    • Corolla 2019-2026 - Where to buy an external handle for the Toyota Corolla? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos