Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. :
  3. Tiger 1050 Sport
    4. : How do you replace the front headlight bulb of the Triumph Tiger 1050?

Model: Triumph Tiger 1050 Sport
Part: Headlight bulb
How do you replace the front headlight bulb of the Triumph Tiger 1050?

In order to replace the headlight bulb of the Triumph Tiger 1050, you need to loosen the screws that secure the inner cover of the front optical group: once these screws have been loosened, it will be possible to detach the inner panel and locate the corresponding bulb. The bulb can be removed from its seat and disconnected from the connector; in this way, the new one can be inserted and connected to the connector. After installation, you can verify that everything works correctly by securing the corresponding panel.


Posted on 29 April 2024 by ScegliAuto



How do you replace the clutch of the Triumph Tiger 1050?
Tiger 1050 Sport The replacement of the clutch on the Triumph Tiger 1050 is done by unscrewing the bolts that secure the casing on the right side of the motorcycle, a
How do you replace the clutch of the Triumph Tiger 1050?
Tiger 1050 Sport The clutch replacement on the Triumph Tiger 1050 is done by loosening the bolts that secure the cover located on the right side of the motorcycle, at
How do I replace the clutch on the Triumph Tiger 1050?
Tiger 1050 Sport In order to replace the Triumph Tiger 1050 clutch, you need to unscrew the bolts that secure the crankcase at the right side of the bike, at the heig

How do you replace the piston on the Sherco SE 250?

The Sherco SE 250 piston is replaced by loosening the screws that secure the cylinder in the upper part of the engine block: in order to remove this cylinder it will also be necessary to disconnect the connectors connected to the engine block itself. Once the cylinder has been removed, it will be possible to access the underlying piston, which will have to be detached from the relative connecting rod by removing the relative fixing ring. When this in turn has been removed, it will be possible to insert the new spare part, then also installing the cylinder.

Watch the video!


by ScegliAuto

More videos