Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. :
  3. Tiger 900
    4. : How to replace the engine oil in the Triumph Tiger 900 Rally Pro?

Model: Triumph Tiger 900
Part: Engine oil
How to replace the engine oil in the Triumph Tiger 900 Rally Pro?

In this tutorial we can see how to replace the engine oil in the Triumph Tiger 900 Rally Pro, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, so that we can work safely, then we place a container under the motorcycle, locate the drain hole bolt and unscrew it using a socket wrench. We then let all the oil in the system drain out, unscrew the old filter and tighten both the replacement and the bolt. At this point, all that remains is to pour in the new oil through the appropriate upper hole.


Posted on 19 May 2024 by ScegliAuto



How do you replace the battery of the Triumph Tiger 900?
Tiger 900 The battery replacement procedure on the Triumph Tiger 900 is done by loosening the screws that secure the seat to its housing, allowing it to be lif
How do i replace the battery on the Triumph Tiger 900?
Tiger 900 In order to replace the battery of the Triumph Tiger 900 you need to loosen the screws that secure the saddle to its housing, so that it can be raise
How do you replace the battery on the Triumph Tiger 900?
Tiger 900 Replacing the battery on the Triumph Tiger 900 is done by loosening the screws that fix the saddle to its housing, so that it can be lifted to give a

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos