Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. UAZ
    3. :
  3. Patriot
    4. : How to disassemble the taillights in the UAZ Patriot?

UAZ Patriot - Video tutorial

Model: UAZ Patriot MK 1 - Years 2005-2022
Part: Tail light
Operation: How to disassemble the taillights in the UAZ Patriot?

In this tutorial we can see how to disassemble the rear lights in the UAZ Patriot, a very simple and fast operation. First of all, make sure that the key is not inserted, then open the tailgate and remove the panel on the back of the headlight to be removed, releasing the relative clip. Once this is done, unscrew the headlight fixing screws with an 8mm socket wrench and an extension, grab it and extract it from the bodywork by pulling it towards us. At this point we can proceed with the replacement of the damaged element, whether it is a bulb or the headlight itself.


Posted on 7 May 2023 by ScegliAuto



How to disassemble the rear light in the UAZ Patriot?
UAZ Patriot (2005-2022 / MK 1) In this tutorial we can see how to disassemble the rear light in the UAZ Patriot, so that you can replace a faulty bulb or the headlight itself. Firs
Replacement of the air filter of the UAZ Patriot
UAZ Patriot (2005-2022 / MK 1) In this video tutorial we will see how to disassemble and replace the Uaz Patriot engine air filter, following the instructions below. First of all,
How to replace the fuel filter on the Uaz Patriot
UAZ Patriot (2005-2022 / MK 1) In this short and simple guide, let's see the instructions on how to disassemble and replace the Uaz Patriot fuel filter. First we raise the car and

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos