Do it yourself
| ||||
|
Model: (Various brands) Various
In this video, we see how it is possible to replace the battery in the wheel sensor of a motorcycle. It is a common CR2032 battery, but with pins to be soldered. First, we need to remove the battery, so we will need a cutter to remove the sensor cover. Removing the battery will not be easy because it is secured with adhesive (as well as being soldered). We can find this type of battery on E-bay with the code 334912587186 at a price of 1.90 euros + 2.90 euros for shipping. Since we already have the positive tab, we cut the one from the battery. We will need soldering paste; we place the paste on the two pins, then with solder and soldering iron we solder the part. Remember that the entire top part is positive, so if you touch the bottom part, you will short circuit! We measure with a tester both the positive and negative, and with sealing paste, we rebuild the cap that we had to remove to access the battery. All that remains is to reassemble the sensor on the wheel.
Posted on 20 March 2024 by ScegliAuto
How the tire pressure sensor works.
(Various brands) Various In this video we can see how the tire pressure warning light works. If the tire pressure warning light (!) Comes on, it means a tire is deflating. Th
How do you remove the tire pressure sensor?
(Various brands) Various In order to remove the tire pressure sensor, you must first loosen the bolts that secure the wheel corresponding to the sensor to be removed. In this
How do you reset the tire pressure warning light on Hyundai Sonata?
(Various brands) Various When the pressure of one of the Hyundai Sonata's four tires is insufficient, the tire pressure warning light illuminates. The pressure of each indivi |
Frequently Asked QuestionsChange the Yamaha Tracer 900 engine oil and oil filterWe see below the step-by-step instructions to be able to carry out the routine maintenance service, replacing the engine oil and the oil filter, of the Yamaha Tracer 900. First of all we put our bike on the central stand and begin to unscrew the vent bolt of the the oil that we find under the engine, letting it drain in a container for about ten minutes; after which we use the special key to unscrew and remove the filter cartridge, replacing it with the new one, as shown in the video. Finally, unscrew the filler cap and top up with the new oil! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |