Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
What are the signs of a bad catalytic converter? Firstly, usually the engine stalls shortly after starting, there is poor acceleration and strange noises come from the exhaust system when accelerating or picking up speed. Another important sign is a significant increase in fuel consumption. Furthermore, a strong smell of exhaust fumes can be felt inside the cabin, especially when the engine has been idle for a certain period of time. A small volume of exhaust gases comes from the tailpipe, and above all, the engine light comes on. Let's see how to check the catalytic converter. Turn off the engine and let it cool for an hour and a half. We remove the catalytic converter very carefully and check that it is not contaminated, does not melt or deteriorate. If a contamination is found, we will have to have it cleaned by a specialist. If you notice any warping or melting, we'll need to change it.
Posted on 26 December 2022 by ScegliAuto
How do you clean the catalytic converter in the car?
(Various brands) Various In order to replace the car's catalytic converter, you need to open the hood, so that you can access the components inside the engine compartment. In
The very important function of the two Lambda probes
(Various brands) Various If our car has voids under acceleration, the problem is given by the Lambda probe, which is placed on the muffler before the catalytic converter, and
How to clean the AdBlue injector on VAG Group cars
(Various brands) Various In this video we see how to clean the AdBlue injectors of VAG group cars. In this specific case it is a Volkswagen Sharan, but the procedure is the s Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |