Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In this video tutorial, we can see how it is possible to replace the control arm of a car: a control arm allows the wheel to change position in relation to the body or subframe. The front and rear bushings are fixed to the subframe and body. Loosen the fastening elements of the bushings, without completely unscrewing them. Unscrew the fastening element of the ball joint from the steering knuckle. Remove the fastening elements of the bushings and disassemble the control arm. It is recommended to carefully watch the video as the work is quite complex to perform, especially if you don't have experience. It is advised to go to a mechanic workshop.
Posted on 29 August 2023 by ScegliAuto
How do you replace the swing arm bushings?
(Various brands) Various In order to replace the bushings of the swinging arm, it is necessary to disassemble the latter from the car, removing the corresponding wheel and un
How to remove the windshield wiper arm
(Various brands) Various Removing the windshield wiper arm can become a difficult operation if you do not have the right tools, as the Torx screw used to lock the arm usually
How do you replace the swing arm of the Honda Insight?
(Various brands) Various In order to replace the Honda Insight swing arm it is necessary to lift the car and loosen the bolts that secure the wheel corresponding to the arm t Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.083
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |