Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. (Various brands)
  4. :
  5. Various
  6. : When should you calibrate the steering angle sensor?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Steering rods
Operation: When should you calibrate the steering angle sensor?

There are two different types of steering angle sensors: the analog one that has a rotary potentiometer, and the digital one that has an optical or Hall effect sensor. The steering angle sensor follows the movement of the steering wheel and the expected steering angle. For this reason, it is very important to have a well-adjusted sensor. If the systems do not function correctly, dangerous driving instabilities can occur, leading to accidents. The vehicle's ESP warning light indicates that the system is not functioning properly. When this light turns on, it is necessary to go to the workshop to have the steering recalibrated.


Posted on 7 September 2023 by ScegliAuto



How to replace the steering angle sensor
(Various brands) Various The steering sensors are digital and have an important safety function for the car. It is called steering angle sensor precisely because it measures
How to reset the steering angle sensor on any Mercedes without tools.
(Various brands) Various In this video, we see how to reset the steering angle sensor: in fact, if we have disconnected the battery, it is necessary to reset or reinitialize
How do you replace the steering angle sensor on Volkswagen cars?
(Various brands) Various To replace the steering angle sensor on Volkswagen vehicles, you need to loosen the screws that secure the airbag in the center of the steering wheel

    Frequently Asked Questions

    • Vari - What does code 68 mean on the Opel? Read Answer
    • Vari - How much does a mechanical type box cost? Read Answer
    • Vari - What can the mood depend on when turning the steering wheel to the left? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos