Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to clean windshield nozzles properly

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Windshield washer nozzle
Operation: How to clean windshield nozzles properly

If the windshield nozzle of your car is clogged, know that the best thing to do to clean it is not to stick a pin inside, because in this way not only we will not be able to clean it properly, but we also risk damaging the nozzle. Let's do a test. If the pump is working and the nozzles are not spraying, then there are two possibilities: either there is no more fluid or the nozzles are completely clogged. In this case, you have to disconnect the tubes and remove the nozzle. Take a basin, a bottle of Coca-Cola. Generously cover the nozzles and let them soak overnight. Reassemble them and the next day they will work perfectly.


Posted on 10 September 2023 by ScegliAuto



How to replace the washer nozzles on a Volkswagen vehicle
(Various brands) Various To access the washer nozzles on your Volkswagen vehicle, you must first raise the hood, as they are located at the top of the hood, ie the one near t
How to apply adhesive seals to the windshield?
(Various brands) Various The YouTuber and creator of this video shows us how it is possible to apply an adhesive seal to the windshield of our car, regardless of the model or
How to quickly clean your car's windshield wipers
(Various brands) Various Having perfectly working and clean windshield wipers allows you to always have a windshield free from any traces of dirt. Unlike what you might think

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos