Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to replace the bulb of the car's side turn signal light?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Side turn signal light bulb
Operation: How to replace the bulb of the car's side turn signal light?

Replacing the bulb of the side turn signal is a very simple operation that can be performed in a few minutes and independently. Today, we will explain how to perform this identical operation in most cars. The first thing to do is to open the engine hood and locate the bulb cap of the turn signal, usually located at the bottom right or left, depending on which bulb we are replacing. Once the cap is located, all we have to do is simply rotate it and then disconnect the bulb and connector. Insert the new bulb into the connector and close the cap. Close the hood and test the functioning of the bulb.


Posted on 26 December 2023 by ScegliAuto



How to replace the turn signal light bulb
(Various brands) Various Replacing a car bulb independently is a very simple and quick operation to carry out independently. To replace the turn signal side marker bulb, we n
How to change the headlight bulb in a Mazda E2000?
(Various brands) Various To replace the headlight bulb in the Mazda E2000, it would be advisable to have an electric screwdriver. We can also use a regular screwdriver and so
How to turn off the sh 300 service light
(Various brands) Various In order to proceed with resetting the oil change service on the scooter, it is necessary to proceed as follows: after having carried out the coupon

    Frequently Asked Questions

    • Vari - What does code 22 on the Chevrolet Prisma indicate? Read Answer
    • Vari - How to change the arrow bulb in the mirror on Audi A1? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos