Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In this video, we can see how to restore the transmission of a Ford car with automatic transmission, a quite common issue with this brand. First, we turn on the ignition, put the transmission in neutral, then turn off the ignition and wait for about fifteen to twenty seconds. Then, we put the transmission in "park" position, wait another fifteen/twenty seconds, then turn on the instrument panel again and wait for the usual twenty seconds. We turn off the car and engage the "drive" gear, then turn on the ignition again and the car will emit a sound signal to indicate that we have completed the procedure. To make sure everything is in order, we start the car and reach about 80 mph, gradually increasing the throttle to 25% of its power, then gradually come to a stop. We repeat this process by accelerating first to 50% and then to 100% for relearning.
Posted on 28 December 2023 by ScegliAuto
How to recalibrate the automatic transmission in a Ford?
(Various brands) Various In this tutorial, we can see how to calibrate the automatic transmission of a Ford, an operation to be carried out, for example, in case of problems
How to reset the automatic transmission on a FORD
(Various brands) Various When we have a malfunction of the automatic transmission on a Ford car, we can proceed with this simple procedure to carry out the reset and probably
Symptoms that tell us that the automatic transmission fluid is severely deteriorated
(Various brands) Various In this video, some problems that can occur on an automatic transmission are presented to us; if when we start instead of feeling a smooth engagement Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |