Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
The valve cover inside our engine compartment also sometimes requires manual labor, as it can wear out and get damaged over time. Today, with the help of this video tutorial, we will explain how to restore your valve cover. Start by removing the pieces that prevent you from removing the cover, in our case, we remove the air tube and some engine wiring with a combination wrench. Once the obstruction pieces are removed, unscrew the nuts and bolts that secure the cover, using WD-40 to lubricate them before removal. After removing the locks, remove all the gaskets on the cover and use AKRA ENGINE spray to clean the inside and outside of the cover. Use a specific product to remove the paint from the cover, and once it is dry, begin painting it. Install the new gaskets and reassemble the cover in its place.
Posted on 4 February 2024 by ScegliAuto
How to remove the EGR valve from a Ford.
(Various brands) Various Removing the EGR valve for periodic cleaning is a very simple operation that can be done independently. On Ford car models, this operation is more or
EGR valve as it disassembles from the car
(Various brands) Various How do we remove the EGR valve from our car? We disassemble the valve to change or clean it. We unscrew the locking pins of the ventilation pipe, rem
How to test a Wastegates valve
(Various brands) Various In this video tutorial we will see the procedure that will allow us to test the functioning of the Wastegate valve for turbocharged engines, followin Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.094
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |