Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to remove the cover of the rearview mirror of a car

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Interior rearview mirror
Operation: How to remove the cover of the rearview mirror of a car

On most four-wheeled vehicles, to remove or adjust the rearview mirror, you need to first remove the cover. Today we will explain how to perform this procedure easily and quickly, thanks to the short video tutorial. To remove the cover of the mirror, we must: - pry on the cover; - unhook it, being careful not to damage the hooks; - remove it; once removed, you will have access to the central screw of the mirror and other connections related to the mirror. To remove the mirror, you will need to unscrew the central screw.


Posted on 30 March 2024 by ScegliAuto



Removing the car exterior rearview mirror
(Various brands) Various Today we will see how to remove the external rearview mirror in a generic car: the procedure can vary from car to car but the main steps remain the s
Replace the mirror of the outside rearview mirror
(Various brands) Various Replace the mirror mirror if damaged? How to do? Let's see how the car mirror is removed. We pry between the perimeter of the mirror frame and the mi
How to replace the external rearview mirror of the Cadillac Deville.
(Various brands) Various If you need to change the external rearview mirror and you don't know how to do it, then all you have to do is follow the instructions in the followi

    Frequently Asked Questions

    • Vari - What is the button under the rear view mirror on the Jeep for? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos