Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. : Crafter

Volkswagen Crafter - Videoguide

Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
How do you replace the battery of the Volkswagen Crafter?

Inside the Volkswagen Crafter, the battery is positioned in the passenger compartment: in order to reach it, you will need to go to the front passenger side …read all…
Posted on 28 May 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
How to remove the steering wheel in the Volkswagen Crafter van?

In this tutorial we can see how to remove the steering wheel in the Volkswagen Crafter van, an extremely simple and quick operation. Before proceeding, we open …read all…
Posted on 19 May 2024 by ScegliAuto
Volkswagen Crafter (2006-2017 / MK 1, 2E, 2F)
How do you reset the Service light on the Volkswagen Crafter?

To reset the Service light on the Volkswagen Crafter, you need to turn on the instrument panel by turning the key inside the ignition switch: once turned on, …read all…
Posted on 14 May 2024 by ScegliAuto
Volkswagen Crafter (2006-2017 / MK 1, 2E, 2F)
How do you reset the Service light on the Volkswagen Crafter?

The reset operation of the Service light inside the Volkswagen Crafter can be performed by turning on the instrument panel by turning the key inside the …read all…
Posted on 13 May 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
How to reset the service in the Volkswagen Crafter van?

Resetting the service on the Volkswagen Crafter van, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must …read all…
Posted on 12 May 2024 by ScegliAuto
Volkswagen Crafter (2006-2017 / MK 1, 2E, 2F)
How to reset the service light on the Volkswagen Crafter

To reset the service on the Volkswagen Crafter, start by turning on the instrument panel without turning on the car engine. Hold down the "o" button to the …read all…
Posted on 8 May 2024 by ScegliAuto
Volkswagen Crafter (2006-2017 / MK 1, 2E, 2F)
How do you set the clock on the Volkswagen Crafter?

On board the Volkswagen Crafter, the clock adjustment is done by turning on the instrument panel, turning the ignition key into the corresponding slot: then …read all…
Posted on 8 May 2024 by ScegliAuto
Volkswagen Crafter (2006-2017 / MK 1, 2E, 2F)
How do you reset the Service light on the Volkswagen Crafter?

The procedure for resetting the Service light on the Volkswagen Crafter involves turning on the ignition by turning the key in the ignition switch: once the …read all…
Posted on 3 May 2024 by ScegliAuto
Volkswagen Crafter (2006-2017 / MK 1, 2E, 2F)
Positioning and fuse diagram of the Volkswagen Crafter

In this guide, we will see the positioning of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, we get on board the vehicle and …read all…
Posted on 11 April 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
How to reset the maintenance light on the 2017 Crafter

In this video we can see how to reset the maintenance light on the 2017 Volkswagen Crafter: with the instrument panel off, press and hold the reset button for …read all…
Posted on 9 April 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
How to reset the AdBlue warning light on the Volkswagen Crafter

Below we will see the instructions that will allow us to reset the warning light for topping up the AdBlue fluid in the Volkswagen Crafter. After topping up …read all…
Posted on 16 March 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
Where are the fuses of the Volkswagen Crafter located?

On the Volkswagen Crafter, all fuses are contained within the appropriate fuse boxes that are present on the vehicle: in this car model, it is possible to …read all…
Posted on 7 March 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
How do you reset the AdBlue warning light on the Volkswagen Crafter?

In order to reset the AdBlue warning light on the Volkswagen Crafter, you need to perform a refill by adding the necessary amount of additional fluid into the …read all…
Posted on 28 February 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
Resetting the service indicator of the Volkswagen Crafter.

Before reaching the mileage required for the Volkswagen Crafter's service, a message appears on the central display to remind us. After performing the …read all…
Posted on 6 February 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
How to reset the service light in the Volkswagen Crafter van?

In this tutorial, we can see how to reset the service in the Volkswagen Crafter van, an extremely simple and quick operation. Before proceeding, make sure you …read all…
Posted on 27 January 2024 by ScegliAuto
Volkswagen Crafter (2006-2017 / MK 1, 2E, 2F)
Resetting the service light of the Volkswagen Crafter.

Once the engine oil of the Volkswagen Crafter has been changed, we need to reset the control system that alerts us to the need for intervention. We sit in the …read all…
Posted on 16 January 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
Where to find the fuses of the Volkswagen Crafter

The steps illustrated in this guide will show us where to find the fuse boxes of the Volkswagen Crafter. First, we get inside the vehicle to locate the …read all…
Posted on 12 January 2024 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
How to reset the service light of the 2017 VW Crafter?

The service warning light reset on a Volkswagen Crafter vehicle is only performed after completing all the maintenance operations. The basic maintenance …read all…
Posted on 16 December 2023 by ScegliAuto
Volkswagen Crafter (2006-2017 / MK 1, 2E, 2F)
Where are the fuses located in the Volkswagen Crafter?

On the Volkswagen Crafter, all the fuses are contained in the appropriate fuse boxes that are installed on the vehicle: in this car model, it is possible to …read all…
Posted on 14 December 2023 by ScegliAuto
Volkswagen Crafter (2017-2024 / SZ, SY, MK 2)
Where is the OBD port located on the 2018 Volkswagen Crafter?

To locate the OBD port of your 2018 Volkswagen Crafter, it only takes a few seconds. All you need to do is carefully read the following guide and follow the …read all…
Posted on 13 December 2023 by ScegliAuto
Battery (2) -board computer (2) Checks and maintenance (23) Dashboard (1) Cabin air filter (2) Engine oil (1) Instrument cluster (4) Fuse box (14) Steering wheel (2)

See also:

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos