Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
6R, Polo V, MK V, MK 5, Polo 5
- Years 2009-2017 To replace the power steering pump on a Volkswagen Polo (or Lupo) you must first lift the car safely. So don't trust your jack, but support it with supports. Then remove the right front wheel and mudguard. In the video the pump was broken and the pulley had come off the shaft. We remove the belt and unscrew the four screws that hold the pump. With a 17 and a 22 wrench, we unscrew the connections and extract the pump. We remove the auction. We replace the pump, we stop it with its 4 bolts. Now we reposition the rod, held in place by its three screws. We position the new pulley paying attention to the direction of rotation and to the fact that it is taut in its path, working on the belt tensioner. We put the mudguard and the front right wheel back in place. We put the car back on the ground and top up the power steering oil. At this point, with the car running, we make rapid turns of the steering wheel to the right and to the left; let's see if there is still a need for more oil in the power steering. In the video a revision is made, but following the same operations, you can change the piece. The work is done.
Posted on 22 May 2024 by ScegliAuto
How to remove the power steering pump of a Volkswagen Polo 9N 1.3 Petrol
Volkswagen Polo (2001-2009 / Polo 4, MK IV, 9N, MK 4, Polo IV) Today we will see how to remove the power steering pump of a Volkswagen Polo 9N 1.2 petrol. First of all, we lift the car and start removing the whee
How to remove the airbag and steering wheel on Volkswagen Touran, Polo, and Lupo.
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, MK 5, Polo 5) In this video, we see how to remove the airbag and steering wheel on the Volkswagen Polo (but also Touran and Lupo). With the key inserted into the i
How to replace power steering on Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, MK 5, Polo 5) We will see below the main steps which will allow us to disassemble and replace the power steering on the Volkswagen Polo. First of all we raise the Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |