Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to replace the Volkswagen Golf window lifter motor?

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years 1997-2003
Part: Window motor
Operation: How to replace the Volkswagen Golf window lifter motor?

As we can see in this tutorial, replacing the Volkswagen Golf window motor is a very simple operation. First of all we open the door in which we will go to work, then we disengage the front cover of the handle and unscrew the two screws underneath it with a cross-tip screwdriver. Once this is done, we remove the bottom screw, grab the panel and separate it from the door. We continue by disconnecting the motor connector, fixing the glass with adhesive tape and unscrewing the bolts of both the motor itself and the regulator. Once removed, we can assemble the spare and reassemble everything by following the reverse procedure.


Posted on 18 August 2022 by ScegliAuto



Volkswagen Golf MK5 motor and window mechanism replacement
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let's see in this video how to disassemble and replace the mechanism and the motor for the window lifter on a Volkswagen Golf fifth series, but also
Replacement window motor on Volkswagen Golf MK3
Volkswagen Golf (1991-1997 / Golf 3, MK 3, Golf III) We see in this video the main steps to remove and replace the window motor on a Volkswagen Golf third series. First of all we open the front door and
How do you replace the window lifter button on the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In order to replace the window lifter button on the Volkswagen Golf, you need to detach the molding located along the handrail of the door correspond

    Frequently Asked Questions

    • Golf 2012-2019 - How do you disassemble the window control panel of a Volwsvagen Golf 7 series? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos