Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : Volkswagen Golf GTI gear lever bushing replacement

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years 1997-2003
Part: Bushings
Operation: Volkswagen Golf GTI gear lever bushing replacement

In this guide we will see the main instructions that will allow us to disassemble and replace the gear lever bushing of the Volkswagen Golf GTI, but also of the Bora and Jetta. First of all, we get on board the car and begin to disassemble and remove the gear knob and gaiter; then let's unscrew and remove the gear lever bushing, using pliers, as shown in the video. At this point let's use some grease to lubricate the component, thus reassembling the bushing; finally we install the gaiter and the gear knob on the lever!


Posted on 26 December 2022 by ScegliAuto



How to remove the gear knob of the Volkswagen Golf 5 GTI
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let's see in this video how to remove and replace the original gear knob of the Volkswagen Golf fifth series, in the GTI version. First we get on boa
Volkswagen Golf GTI gear knob replacement
Volkswagen Golf (2008-2012 / Golf VI, Golf 6, MK 6, 5K1) Let's see in this short and simple guide the instructions that will allow us to disassemble and replace the gear knob and the headset of the Volkswag
How to replace the GTI lettering on the Volkswagen Golf body
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) We see in this guide the instructions that will allow us to replace the GTI writing on the bodywork of the Volkswagen Golf. To remove the GTI letteri

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos