Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Golf
  6. : How to reset the tire pressure on a Volkswagen Golf VII (on two different releases)

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf 7, Golf VII, MK 7 - Years 2012-2019
Part: Wheel
Operation: How to reset the tire pressure on a Volkswagen Golf VII (on two different releases)

When the TMPS turns on, it signals that one of the tires is not at the pressure indicated by the manufacturer. The Values are indicated on the cheek of the driver's door. Then reset the light after checking this pressure. So, we close all four doors, turn on the ignition, let's see the first method: let's go and press the "car" key. Scroll down the menu until you get to "tyre control system". we just need to press "set" and then "confirm". Second system, with a previous release: Let's press "car" and then we go to a submenu where we press "tyres", then "set" and then again "confirm".


Posted on 10 May 2023 by ScegliAuto



How to reset the low tire pressure warning light on a Volkswagen Golf VII
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) In this video we can see how to reset the low tire pressure warning light on a Volkswagen Golf VII; the same system will also work on all other model
How to reset tire pressure on the Volkswagen Golf VII
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) After adjusting the tire pressure of the Volkswagen Golf, using as a reference the plate located in the door frame, which shows the recommended value
Resetting the tire pressure warning light on the Volkswagen Golf.
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) Briefly, we will see the necessary instructions on how to reset the tire pressure warning light of the Volkswagen Golf; before performing the reset,

    Frequently Asked Questions

    • Golf 1997-2003 - What is the location of the esp sensor on the Volkswagen Golf 4? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos