Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Golf
    4. : How to disassemble the throttle body of a Volkswagen Golf.

Volkswagen Golf - Video tutorial

Model: Volkswagen Golf Golf VI, Golf 6, MK 6, 5K1 - Years 2008-2012
Part: Throttle body
Operation: How to disassemble the throttle body of a Volkswagen Golf.

Let's briefly go over the instructions that will allow us to disassemble and replace the throttle body of the Volkswagen Golf. First, we open the engine hood of our car and begin to disconnect the air intake hose by loosening the metal clamp screw. Then, we unscrew the fastening screws of the throttle body, disconnect the electrical connector of the throttle position sensor to remove it, as shown in the video. At this point, we perform the cleaning or replacement of the entire component, applying the reverse procedure for reassembly!


Posted on 13 June 2023 by ScegliAuto



How to remove the throttle body on Volkswagen Golf 5 1.6
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let's see in this video how to remove the throttle body on a Volkswagen Golf fifth series, with 1.6 Petrol engine. First we open the bonnet of our ca
How to remove the throttle body on Volkswagen Golf 4 1.4 Petrol
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial we will see how to remove the throttle body on a Volkswagen Golf 1.4 Petrol, fourth series; this procedure can also be applied
Remove the injectors on Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Let's see the disassembly of the petrol injectors on Volkswagen Golf 5. We lift the front hood of the car to access the car engine, we identify the s

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos